Ceramic Ball Bearings for Dental Hand Pieces

Ceramic ball bearings are used in many of the rotary tools used by dentists and dental hygienists. They allow the rotary surface of the tool to spin smoothly at fast rates. In order to keep your dental tools working properly and accurately you need to maintain your ceramic ball bearings properly. Proper care starts with proper cleaning.

The Department of Health and Human Services issued a statement on dental hand piece sterilization on September 28, 1992. This statement outlined how dental Dental Handpiece Manufacturer, including those with ceramic ball bearings, should be cleaned. The first note in this statement recommended that dental hand pieces should not be cleaned using chemicals. The preferable method for cleaning dental equipment is heat sterilization. If your dental equipment is not designed to be heat resistant then you should either replace it with modern equipment that is heat tolerant or you should retrofit the older hand pieces with heat resistant elements.

Dental equipment, including ceramic ball bearings, needs to be cleaned after they are used on a patient. This will help to lower chances for infection and patient contamination. Because you will need to thoroughly clean your dental equipment after each use, you will need to keep a good supply of ceramic ball bearings and tools on hand.

When shopping for ceramic ball bearings you will have a lot of choices to make. Your first choice will need to be what manufacturer to use. There are several manufacturers that make ceramic ball bearings including Midwest. After you find a manufacturer that you like your next decision will be what diameter of ball bearing you need. Some of the inner diameters that ceramic ball bearings come in include 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9 mm, 10mm, 12mm, 15mm, 17mm and 20mm.